Copper Mould Plate Mould Coating
Copper has lower hardness which leads to lower anti-abrasive property.Therefore,the area at the lower part of the moulds,where the stress increases drastically due to shells,will be more severely worn.To increase the life time of copper moulds,we provide uniform mould interior surface plating with suitable hardness.Most of the copper mould tubes for small size billet casting are not used in any casting system where there are rigid casting stream support,therefore they are very sensitive to wearing.We use hard chrome plating which provides efficient anti-wearing protection on the interior surface of the mould tubes and increase the life of mould tubes.The plating thickness recommended by us will be controlled in the best range.As for the coating of copper mould plates,based on our years of experience,we are able to provide Chrome coating,Ni-Cr coating,Ni-Fe coating and Ni-Co coating to meet the demand of various customers both at home and abroad.
Copper Mould Plate Configuration
 |
|
| Narrow Face of Slab Mould | |
 |
 |
| Broad Face of Slab Mould | Copper Plate Raw Material |
 |
 |
Copper Mould Plate Parameter
